Nov 10, 2017

Faulty equipment

I'm somewhat at a crossroads in my film photography right now. No, I'm not having an existential crisis about what film to shoot, what format, Ilford vs. Kodak...nothing like that. I've had several cameras develop problems which have impacted my shooting abilities lately.
My AV-1 was overexposing by at least a couple of stops before I changed out the batteries. The sky is completely blown out here, of course, but you can at least see how Kentmere 400 deals with overexposure. Every frame in this roll was affected, several much worse than this one.  Souped in d-76 1:1.

To date, here are the camera issues I'm dealing with:

  • Canon A-1 with a sticky shutter and infamous 'Canon squeal'.  I'm told that this is actually fixable, and I just might put out the funds necessary to get this done.
  • Canon Elan 7, at one time my flagship film camera body, has a broken door shutter. Up until a couple of years ago this was easily fixable by ordering a $12 USD part.  Everywhere I'm looking that part is showing "NLA".  
  • My Canon AV-1 was overexposing every single frame, and I thought something was wrong with it. A quick battery replacement solved that problem. 
  • My Mamiya C330 continues to display vertical lines on either side of the frame, sometimes randomly, effectively turning it into a 645 when I crop.  I still am very interested in a regular 645 SLR/Rangefinder at some point.
Same camera, same film after changing out the battery. Note to self: Always check AE settings against what feels reasonable at the time. When in doubt, check with a DSLR or light meter. Saling House in historic Weston, Oregon.

As luck would have it, I just picked up a Canon Rebel 2000 in pristine condition, and for a very reasonable price. That will boost my EOS shooting, but I'm still not sure what to do when that film door comes apart...

Kentmere 400 in d-76 1:1, shot in a Canon AV-1 with a fresh battery.
So, I'm down to a single functions Canon FD and two EOS film cameras to shoot with. A Mamiya TLR if I want to put up with its quirks. And a Zero Image pinhole for those times I'm feeling all pinholey.

Kentmere 400 in d-76 1:1, shot in a Canon AV-1 with a fresh battery.
My priorities right now are to get my A-1 working again if possible, and replace it if not. Both are about the same cost when purchased from a reputable dealer (I don't do eBay). I'm really hoping that a door latch for the Elan 7 can be found. At this point, I'd be happy if I could get somebody to 3D print something. We're on the cusp of winter, and I'd like to shoot up some higher speed, bulk rolled films I have in the freezer.

No comments:

Post a Comment

Thanks for commenting! Real people only, please. No spambots or other nefarious creatures allowed in here.